Supplier of HID xenon kit,HID conversion kit,xenon headlight,Auto LED light,Parking sensor » Auto LED bulbs

News about LED Daytime Running Light and Installation

admin — Sun, 18 Jul 2010 15:02:01 +0000

>> DRL PRODUCT NEWS AND INSTALLATION:

1. Daytime running lights are a strong growth market for LEDs in vehicles, according to a report from IMS.

According to a recently published report, “LEDs in Automotive Applications” from IMS Research, their importance is set to explode. IMS says that the LED automotive market will double from $650 million in 2006 to $1.3 billion within 10 years.
Today most of the value comes from applications inside the car, such as backlighting dashboards and displays, as well as a wide range of indicator lamps. However the LED value from external lamps will rise from a third of the LED total to over a half by 2013.
Not all cars use DRLs. In some countries, such as Canada, Finland and Sweden, they are obligatory. In the USA and other countries they are not required but are used on many vehicles, while they are little used in other countries such as the UK. However DRL use is growing overall. EU studies have concluded that DRLs save lives, and a law requiring DRL use throughout the EU is widely anticipated.
Daytime running lights will offer a good opportunity for LEDs, according to Fox. “LED DRLs ave long lifetime and low power consumption as well as an attractive appearance. LED DRLs, which were first introduced on the Audi A8 in 2004, are currently used on less than 1% of vehicles. However, IMS Research forecasts that, with very strong growth after 2009, the market revenues for LED DRLs in the next decade will be similar to revenues for LEDs for functions used in rear lighting applications today. DRLs are the application that will lead the way for LEDs to move forward from the rear of the vehicle into front lighting.

2. Daytime running lights: Safety first

When importing a car into Canada, one issue you should know about is the use of daytime running lights. This feature, which is mandatory in all vehicles sold in Canada, often sparks debate, especially among those from the US who must modify their cars to meet this requirement.
Daytime running lights, or DRLs, are a safety feature, a low-cost method to reduce crashes. These lights turn on automatically when you start your vehicle, and operate at about half the normal headlight power. The DRLs turn off when the normal headlights are switched on.
DRLs have been proven to be especially effective in preventing daytime head-on and front-corner collisions by increasing vehicle conspicuity and making it easier to detect approaching vehicles from farther away.

3.How effective are DRLs?

Nearly all published reports indicate DRLs reduce multiple-vehicle daytime crashes.
A study examining the effect of Norway’s DRL law from 1980 to 1990 found a 10 per cent decline in daytime multiple-vehicle crashes. A Danish study reported a seven per cent reduction in DRL-relevant crashes in the first 15 months after DRL use was required and a 37 per cent decline in left-turn crashes.
DRLs not just raise motorists’ alertness to other cars, they also make their own vehicles become more visible to cyclists and pedestrians. This is a major issue in Canada, especially during the winter months, when visibility on the roads can get pretty atrocious.
By making DRLs mandatory, it eliminates the problem of people forgetting to turn on their light switch when it starts to get dark or when weather conditions deteriorate and as such they are driving without taillights.

4. The History of DRLS

Sweden enacted mandatory DRL laws in 1977. Norway followed in 1986, Iceland in 1988, Denmark in 1990. Canada has required DRLs on new cars since 1989.
GM began installing DRLs on some models in 1993. By 1997, all GM vehicles had installed. GM has kindly offered to SELL you a kit to convert your current vehicle to DRLs. How thoughtful — and how very profitable.
On December 20, 2001, GM petitioned NHTSA to mandate DRLs for all new vehicles in the US.

5.Introduction for H005 (SK-DRL03 )& H006(SK-DRL04)

Superiority for H005,H006:
The products use advanced digital signal processing chip(DSP) as the main controller, and pulse width modulation(PWM) to adjust the brightness of LED DRL. To ensure the constant current and stable light, meanwhile to avoid light flickering, we use dedicated high-power LED drive IC. When start the engine, the LED DRL will be on as well, and turn off in the meantime.The brightness of DRL will lowered by 30% when the headlight or fog light on.
Consistence of DRL(H005/H006):
1. Each set consist two lamps both on the left and right, which is placed in the bottom of the grille in the front headlamp

2. Each set is made up of circuit board, reflective bowl and light shell, lamp, cable form.

3. The products have Emark approval, and the circuit board contains 5 high-power light emitting diodes and electronic control components.

6.H005(SK-DRL03 ) , D03(SK-DRL02) products with difference:

D03(SK-DRL02):

This product adopts special LED drive IC and high-power leds, to ensure constant current and light stability. Its aluminum alloy enclosure, unique designs and good heat dissipation makes it standout from other DRLs.
Fuction:
It is connected to the ignition. Once the car is started, the DRL will turn on automatically. In greasy weather, when the fog lamps or headlamps is on, it will turn off automatically.

H005(SK-DRL03 ):

This product adopts the advanced digital signal processing (DSP) as main chip controller, using pulse width modulation (PWM) technology, to adjust the led brightness. Meanwhile, it also uses special LED drive IC and high-power led to ensure constant current and light stability.
Function:
once the car is started, the DRL will turn on automatically. once the headlight is on,it will dim out automatically to 70% brightness.

7.Installation:

LED Daytime Running Light (SK-DRL04)

admin — Wed, 07 Jul 2010 04:11:31 +0000

LED Daytime Running Light -> Model: SK-DRL04

>> Major Technology Parameters :

1. Rated Working voltage: DC 12V ;
2. Rated Working current: 1.12A ;
3. Rated Power consumption: 13.44W ;
4. Limb darkening current: DC 0.66A ;
5. Limb darkening Power consumption: 7.92W ;

>> Maximum Technology Parameters:

1). Maximum working voltage: DC 24V, 1 minute only;
2).Over working voltage: DC 18V, 1 hour only;
3).Continuously working time ≥24hours: maximum current range≤±2mA
4).Maximum surface temperature:≤60℃（Extraventricular temperature:20℃）

>> LED bulb technology parameters:

1). Bulb Color temperature range: 6,000K-7,000K;
2). Power: 1W(each LED bulb);
3). Rated working current: ≤ 300 mA;
4). Current stablilty≤ ± 2 mA;
5). Brightness is between 70 to 90 LM;
6). LED Size: 225×30x85mm ;
7). Are approved in accordance with ECE R848 ;

>> Electronic Protection:

1). High-Voltage Protection:
The control system will stop working automatically to protect the control module from damage when the power voltage is higher than 15.5V, then LED light only works by the outer power directly;
2). Low-Voltage Protection:
The LED light will shut off to protect the system once the voltage is lower than 9v;
3). Lose-Frequency Protection:
The LED light shut off once the control frequency is abnormal to protect the control module and LED light.
4).Wrong-Connection Protection:
It is no harmful to circuit when the three cables of LED were connected incorrectly. The LED light is off when connection is wrong, it will be on when connection is right. The three cables of LED light are VBB, Vss and VC respectively.

>>Consist of:

2 LED lamps with 5 non replaceable LED light sources each;Wiring; User manual; One paper packing box;

>>Package Size: 335mm*258mm*53mm;

….. << Catolog >>

LED Daytime Running Light (SK-DRL03)

admin — Wed, 07 Jul 2010 04:09:06 +0000

LED Daytime Running Light -> Model: SK-DRL03

>> Major Technology Parameters :

1. Rated Working voltage: DC 12V ;
2. Rated Working current: 1.12A ;
3. Rated Power consumption: 13.44W ;
4. Limb darkening current: DC 0.66A ;
5. Limb darkening Power consumption: 7.92W ;

>> Maximum Technology Parameters:

>> LED bulb technology parameters:

>> Electronic Protection:

>>Consist of:

2 LED lamps with 5 non replaceable LED light sources each;Wiring; User manual; One paper packing box;

>>Package Size: 335mm*258mm*53mm;

….. << Catolog >>

High Power LED Daytime Running Lights

admin — Wed, 07 Jul 2010 02:43:40 +0000


Skeenway is the manufacturer of LED bulb , HID xenon lights , HID ballast and so on.Our LED Daytime Running Light is a kind of new-style green product for automotive, with RDW Emark-4 certificate. No pollution, no noises, no electronic interferer. We adopt advanced constant-current controlling technology, so our product can be light equably with full color.If anything you are interested in , please contact us.
* News about LED Daytime Running Light and Installation?

LED DRLs SK-DRL01	LED DRLs SK-DRL02	LED DRLs SK-DRL03	LED DRLs SK-DRL04

LED Daytime Running Light (SK-DRL02)

admin — Wed, 07 Jul 2010 01:19:58 +0000

LED Daytime Running Light -> Model: SK-DRL02

>> Major Technology Parameters :

1. Rated Working voltage: DC 12V and 24V;
2. Rated Working current: 0.88A and 0.44A;
3. Rated Power consumption: 10.56W (10 X 1w/LED Bulb);
4. Maximum surface temperature: ≤ 50degree (Extraventricular temperature: 20degree)

>> LED bulb technology parameters:

1). Bulb Color temperature range: 6,000K-7,000K;
2). Power: 1W(each LED bulb);
3). Rated working current: ≤ 300 mA;
4). Current stablilty≤ ± 2 mA;
5). Brightness is between 70 to 90 LM;
6). LED Size: 192×32x45mm ;
7). Are approved in accordance with ECE R848 ;

>> Electronic Protection:

>>Consist of:

2 LED lamps with 5 non replaceable LED light sources each;Wiring; User manual; One paper packing box;

>>Package Size: 246mm*198mm*78mm;

….. << Catolog >>

5050 Waterproof Flexible SMD LED RGB Strips Multi Colors

admin — Tue, 06 Jul 2010 04:40:06 +0000

LED RGB Strips Multi Colors -> Model: SK-RL02

>> Main features :

1. LED Sources: 5050 SMD LED
2. LED Quantity: 30,48,60 PCS 5050 SMD every 1 meter.
3. Beam Angle: 120°viewing angle
4. Color: static red, blue, purple, green, yellow or white. Jumpy or gradual changing is also available
5. Working Voltage: 12V DC
6. Power Consumption: Less Than 4.8W
7. Waterproof(IP67 or IP65) and Nonwaterproof are both available.
8. CE, RoHS compliant

>> RGB LED strips use high brightness 5050 SMD LED. Colors can be controlled by controllers. It can be static red, blue, purple, green, yellow or white. Jumpy or gradual changing is also available. Applications are as follow:

1. Path & contour marking
2. Elegant interior decoration
3. Backlighting for larger size ad-signs
4. Landscape outlines
5. Signal lighting, etc
6. Swimming pool
7. Car and motorcycle decorative lighting
8. Architectural decorative lighting
9. Archway Lighting
10.Canopy Lighting
11.Bridge edge lighting
10.Amusement park and theater lighting
11.Emergency hallway lighting
12.Auditorium walkway lighting
13.Stairway accent lighting
14.Emergency Exit path lighting
15.Cove lighting

….. << Catolog >>

LED Day Running Light (DRL)

admin — Mon, 05 Jul 2010 10:29:22 +0000

LED Daytime Running Light -> Model: SK-DRL01

>> Major Technology Parameters :

>> LED bulb technology parameters:

1). Bulb Color temperature range: 6,000K-7,000K;
2). Power: 1W(each LED bulb);
3). Rated working current: ≤ 300 mA;
4). Current stablilty≤ ± 2 mA;
5). Brightness is between 70 to 90 LM;
6). LED Size: 150×30x45mm ;
7). Are approved in accordance with ECE R848 ;

>> Electronic Protection:

>>Consist of:

2 LED lamps with 5 non replaceable LED light sources each;Wiring; User manual; One paper packing box;

>>Package Size: 232mm*156mm*72mm;

….. << Catolog >>

2 x 22 LED Flash Flashing Strobe Grill Light

admin — Mon, 05 Jul 2010 10:13:28 +0000

Strobe-LED-light 2X22-> Model: SK-S203

>> Description:

Colour: White,Amber,Blue,Red are available
Number of Panels: 2
Number of Bulbs in Each Panel: 22
Panel Dimensions (each): 9.5 x 4 x 2.4cm (3.7 x 1.6 x 0.9″)
Control Box Dimensions: 4.7 x 3.2 x 2.7cm (1.1 x 1.2 x 1 “)
Cable Long: 3m
Easy install, super bright

>> Flash Mode

Light A flashes quickly for 8 times, light B flashes quickly for 8 times, repeat continuously.
Light A flashes once, light B flashes once, repeat continuously.
Light A and B flash once at the same time, repeat continuously.

>> Package Include:

2 x 22 LED flash light

….. << Catolog >>

Brand new white 4×3 LED strobe flashing lights

admin — Mon, 05 Jul 2010 10:07:59 +0000

Strobe-LED-light 4X3-> Model: SK-S201

>> Description:

Colour: Bule,Red are available
Number of Panels: 4
Number of Bulbs in Each Panel: 3
Panel Dimensions (each): 4.8 x 1.4 x 1.3cm (1.9 x 0.5 x 0.5”)
Control Box Dimensions: 7.6 x 4.8 x 2.5cm (3.1 x 1.9 x 1”)
Cable Long: 3m
Easy install, super bright

>> Flash Mode

Light A flashes quickly for 8 times, light B flashes quickly for 8 times, repeat continuously.
Light A flashes once, light B flashes once, repeat continuously.
Light A and B flash once at the same time, repeat continuously.

>> Package Include:

4 x 3 LED flash light

….. << Catolog >>

Auto LED T20 Turn light T20-WG7440-18SMD

admin — Fri, 28 May 2010 07:56:46 +0000

Auto LED T20 Turn light -> Model: T20-WG-18SMD

>> Detailed Product Description

* LED quantity: 18 pcs SMD
* Lamp holder type: Wedge 7440
* Power: 5.4 W
* Dimension: Φ 18mm * 41mm
* Input voltage: 12/24V DC or any other low voltage
* Material: aluminum and plastic
* Colors: white, amber, red, green, and blue (can be selected)
* Adaptable automobile style：all kinds of automobile style

>> Characteristics：

* Immediate response on/off
* Environmental-protective and enegy-saving lighting.
* Long life reaching to 30,000 to 50,000 hours
* General model used in Auto lighting can be suitable to be applied in all kinds of vehicles.
* Easy installation and is available to be used again after repairing when there is demage occured.

>> Quality Guarantee: one year

If the proudct has been used under the normal condition for one year and the quality-related fault indeed occured accordingly, we can repair the produdct free of charge even giving replacement.

….. << Catolog >>